Kamui Tips
NewsletterYouTubeFaceBookTwitterAddThis

How do I install a Kamui™ tip?

 

The proper way to install a Kamui™ Tip on a pool cue is with a pool cue repair lathe. The lathe does NOT need to be set to a high speed(500RPM MAX). Be sure you have a sharp cutting tool and sharp shaping tools.

Before installation be sure to buff the gluing surfaces of both the ferrule and the "glue" side of the Kamui™ Tip. The Kamui™ Tip is ready for installation when the word "glue" on the glue side of the Kamui™ tip is buffed off. We recommend using 400 grit sandpaper.

The recommended glue is LocTite Gel found at your local Home Depot. Be sure that the LocTite is not old.

 


Copyright © 2005-2014 Kamuitips.com, All Rights Reserved.